Conductivity Meters
They are devices that serve to measure conductivity; also called conductimeters, these equipment are composed of two plates of a special material such as: platinum, titanium, nickel, graphite, among others; a feeder source and a measuring scale; they work in a certain way and there are different types and each one gives a result of a specific conductivity.
Conductivity meters have wide applications, since the instrument not only works for the inspection of water quality, but also for the control in water of the values of PH, electrical conductivity, oxygen and for the measurement of temperature, making it an ideal instrument for analysis in the field.
Types of Conductivity Meters a Laboratory May Need
Conductivity Controller
Table Conductivity Controller
The high precision multiparametric water quality meter contains 13 options, the meter is suitable for measuring conductivity, TDS, salinity, resistivity and dissolved oxygen. Conductivity / TDS / Salinity /
In Kalstein you can find the Ideal Conductivity Meters for your Laboratory
Multi-parameter portable water quality meter
The multi-parameter portable pH meter contains 8 measurement modes, the meter is suitable for measuring pH, ORP...
Benchtop DO / Conductivity Meter YR01837
High-accuracy multiparameter water quality meter contains 13 options, the meter is suitable for measuring the...
Pocket ° C / ° F conductivity meter YR01807
Economical pocket conductivity tester for measuring high conductivity liquids, accuracy: 1% FS....
YR01839 Online Conductivity Controller
Online industrial conductivity controller, 1 to 3 point calibration, 4 to 20 mA outputs. The meter is suitable for...
Our Best Selling Conductivity Meters
Portable dissolved oxygen economics meter, 1 or 2 calibration points, automatic temperature compensation. The meter is suitable for outdoor applications, precision: 0.5mg/l.
Model | YR01819 |
Dissolved Oxygen | |
Range | 0.00 to 20.00mg/L |
Resolution | 0.01mg/L |
Accuracy | ±0.5mg/L |
% Saturation of Oxygen | |
Range | 0.0 to 200.0% |
Resolution | 0.1% |
Accuracy | ±2.0% |
General Specifications | |
Calibration Points | 1 or 2 points |
Temperature Compensation | 0 to 50°C/32 to 122°F, automatic |
Pressure Correction | 60.0 to 112.5kPa/450 to 850mmHg, manual |
Salinity Correction | 0.0 to 50.0g/L, manual |
Memory | Stores up to 100 data sets |
Output | USB communication interface |
Connector | 6-pin nimi-DIN |
Display | Custom LCD (80×60mm) |
Power | 3×1.5V AA batteries or DC5V power adapter |
Battery Life | Approximately 150 hours (turn off the backlight) |
Dimensions | 170(L)×85(W)×30(H)mm |
Weight | 300g |
Analysis of the best Conductivity Meters for your Laboratory
Conductivity Meter: what is it?
Conductivity is the ability of a material to conduct an electric current, that is, a measure of the total ionic concentration...
How do I use a Conductivity Meter?
A Conductivity Meter is a Laboratory equipment, which allows measuring the amount of electrical current or...
Importance of a Conductivity meter in a Laboratory
A Conductivity meter or Conductivity Meter is a Laboratory device that measures the electrical conductivity of the...
Laboratory oximeters Operation and applications
This is an indispensable equipment that can be used inside or outside the laboratory, there are some table...
Catalog of models of Conductivity Meters on offer
-
Benchtop DO / Conductivity Meter YR01837
Select options -
YR01814 Pocket TDS – ° C / ° F Meter
-
YR01828 Benchtop Conductivity / TDS / Salinity / Resistivity Meter
Select options -
YR01836 Benchtop pH / Conductivity Meter
Select options -
Multi-parameter portable water quality meter YR01820
Select options -
YR01808 Pocket TDS ° C / ° F Conductivity Meter
-
Portable Dissolved Oxygen Meter YR01819-1
-
Pocket Salinity Meter YR01815-1
Guides to becoming an expert in Conductivity Meters
What are the steps to use and calibrate a Meter?
It is important to follow the instructions and recommendations of manufacturers for the use and calibration of a phmeter...
What are the steps for using and calibrating a Conductivity Meter?
The importance of this equipment in industrial and Laboratory applications requires that its use be specifically recommended...
Laboratory Conductivity, operation
A Conductivity Meter or conductivity meter is a Laboratory device, which is used to measure the amount of electrical...
Conductivity meter or conductivity meter: How should he be employed?
A Conductivity Meter or conductivity meter is a device used to determine the electrical conductivity of the ions in a solution. This is achieved because this equipment applies an electric field between two electrodes and performs a measurement of the electrical resistance in the dissolution...
Frequently Asked Questions about Conductivity Meters
How to know the prices of the Conductivity Meters?
To know the price of the Conductivity Meters we invite you to send us an email with your request through the contact form.
What are the lead times for Conductivity Meters?
The delivery time of your Kalstein product will depend on the following:
- If the equipment of your interest is in stock or if it must be manufactured.
- The type of freight you have chosen may be either air or sea.
- Equipment in stock:
– Delivery Time (Air): 15-30 days.
– Delivery Time (Maritime): 45-60 days.
- Equipment not in stock:
– Delivery Time (Air): 30-60 days.
– Delivery Time (Maritime): 60-90 days.
How to make a purchase of Conductivity Meters?
You can purchase through:
- By email: [email protected]
- By telephone: +33 (0) 1 78 95 87 02
- E-commerce: Via Kalstein's official website in your country.
How does the warranty work?
At Kalstein, we provide our customers with induction and technical support through new online methods. You can visit our induction videos, technical assistance and guidance provided by a Kalstein team through our YouTube channel (Kalstein English). HERE