Site Requirements and Installation Conditions for the YR02080 Operation Theatre Ceiling Pendant
The YR02080 Operation Theatre Ceiling Pendant is designed for use in operating rooms, emergency rooms, intensive care units, and recovery rooms. Understanding the environmental conditions and installation requirements is crucial to ensuring its optimal performance and longevity. This article delves into the specific site requirements and installation conditions necessary for the effective use of the YR02080.
Understanding the YR02080's Installation Conditions
The installation of the YR02080 requires careful consideration of several factors. These include ceiling height, load capacity, and the configuration of medical gas terminals. The pendant features a rotating arm with a radius of 800mm+800mm, enabling it to function effectively within the confines of a medical environment.
Ceiling Height and Structure
One of the primary considerations for installing the YR02080 is the ceiling height, which should support the pendant's suspension without obstruction. The medical staff should be able to comfortably reach the control panel and any gas outlets. A minimum ceiling height of 2.5 meters is recommended to ensure adequate clearance for medical personnel.
Load Capacity Requirements
The YR02080 has a maximum load capacity of 160 kg, which must be taken into account when planning for installation. The structural integrity of the ceiling must be assessed to ensure it can support the weight of the pendant along with any additional equipment that may be attached.
Environmental Conditions for Optimal Performance
To ensure the YR02080 operates efficiently, the environmental conditions of the installation site must be closely monitored. This includes temperature, humidity, and air quality considerations.
Temperature and Humidity Control
The ideal temperature range for the operation of the YR02080 is between 18°C and 25°C. Maintaining this temperature is essential for the proper functioning of any electronic components within the pendant. Additionally, humidity levels should be kept between 30% and 70% to prevent corrosion and ensure the longevity of the equipment.
Ventilation and Air Quality
Proper ventilation is critical in the areas where the YR02080 is installed. The pendant must be located where there is adequate airflow to prevent overheating of electrical components. The use of air filtration systems can also improve air quality, reducing the risk of contamination during medical procedures.
Power Supply and Connectivity Needs
The YR02080 requires a reliable power supply to operate effectively. Understanding its electrical needs is crucial for installation.
Electrical Specifications
The pendant is equipped with two earth ground studs and requires a standard voltage supply of 220V. Electrical connections must comply with local regulations to prevent any electrical hazards. It is also important to ensure that the circuit used can handle the power requirements without overloading.
Network and Communication Integration
If the YR02080 is to be integrated into a network system for communication with other medical devices, a network socket must be provided. This facilitates data sharing and enhances the functionality of the equipment within the medical environment.
Installation Procedures for the YR02080
Proper installation procedures are paramount to ensure that the YR02080 functions effectively. Here we outline the key steps to a successful installation.
Unboxing and Initial Inspection
Upon receiving the YR02080, inspect the equipment for any visible damage. Ensure all components are included, such as the pendant, mounting hardware, and user manual. A checklist during unboxing can help in ensuring all items are accounted for.
Mounting and Securing the Pendant
The pendant should be securely mounted to the ceiling using proper anchoring techniques. Leveling the pendant is essential to ensure stability, especially since it has a rotating function. Use a spirit level during installation to confirm even alignment.
Power-Up Sequence and Initial Calibration
Once mounted, connect the power supply and perform an initial power-up sequence. Follow the manufacturer's guidelines for calibration to ensure that all features function correctly. This may include testing the gas terminals and verifying that the pendant rotates smoothly.
Technical Specifications of the YR02080
| Model | YR02080 |
|---|---|
| Arm rotating radius | 800mm + 800mm |
| Arm rotating angle | 340° |
| Braking system | Friction brake |
| Maximum load capacity | 160 kg |
| Electrical socket | 2 earth studs |
| Standard configuration | 1 oxygen (O2), 1 air, 1 nitrous oxide (N2O), 1 vacuum suction (VAC), 1 jet exhaust emission (AGSS), 6*10A power outlets, 1 network socket, 1 grounding terminal |
Frequently Asked Questions
What are the ideal environmental conditions for the YR02080?
The ideal environmental conditions for the YR02080 include a temperature range of 18°C to 25°C and humidity levels between 30% and 70% to ensure optimal functionality and longevity.
How do you ensure the YR02080 is securely installed?
To ensure secure installation, mount the pendant to a ceiling capable of supporting its weight and use proper anchoring techniques. Leveling using a spirit level also helps maintain stability.
What are the power requirements for the YR02080?
The YR02080 requires a standard voltage supply of 220V with two earth ground studs. Ensure the electrical connections comply with local regulations to prevent hazards.
Can the YR02080 integrate with other medical equipment?
Yes, the YR02080 can be integrated into a network system for communication with other medical devices, provided a network socket is available for connectivity.
What is the maximum load capacity of the YR02080?
The YR02080 has a maximum load capacity of 160 kg, which must be considered during installation to ensure the ceiling structure can support it.
What steps should be followed during the initial setup of the YR02080?
The initial setup includes unboxing and inspecting the unit, securely mounting it, connecting the power supply, and performing calibration as per the manufacturer's guidelines.
Where can I request a quote for the YR02080?
You can request a quote for the YR02080 by contacting our sales team or visiting our catalog for detailed pricing information.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.